Мы в Twitter
Мы Вконтакте
Мы в Facebook
Company Design-experimental base

[imgx class="block" src="img/editifr/2015/33_0_s1.jpg"]
UEC-Saturn’s Research and Development Office

UEC-Saturn’s Research and Development Office is the largest one in Russia with up-to-date scientific-research base, prototype production, test facilities, equipped with the most advanced hardware and newest technologies. R&D Office competencies comprise the whole engine creation (integration), gas-turbine modules development, including LPC and LPT of 5th generation engines, such as SaM146, PD-14.

[imgx class="block" src="img/editifr/2015/33_0_s2.jpg"]
Development-design and test facilities

UEC-Saturn’s R&D Office is the one of leading Russian center developing the engineering science in gas-turbine technologies. R&D Office has a range of scientific directions (schools) where above 50 specialists with science-degrees (Candidate and Doctor of Engineering) are working. UEC-Saturn engages both industrial research institutes, such as TsIAM, VIAM, VILS, TsAGI, institutes of the Russian Academy of Sciences, and higher education establishments: MAI, RGATU, PNIPU and other.

[imgx class="block" src="img/editifr/2015/33_0_s3.jpg"]
End-to-end development process

UEC-Saturn uses the end-to-end development process on the base of 3D steady and unsteady gas-dynamic, thermal and mechanical analysis, as well as 3D computer models, digital mock-ups. Pluridisciplinary optimization methods are widely used. UEC-Saturn uses automated control system for engineering and technological documentation administration.

[imgx class="block" src="img/editifr/2015/33_0_s4.jpg"]
Research-and-technology backlog

UEC-Saturn realizes the program of creation a research-and-technology backlog, including one in the sphere of industrial critical technologies, such as development and adaptation the composite materials for fun parts of the SaM146 engine, high-temperature materials, including non-metallic and intermetallic compounds for HPT, combustion chamber and LPT of SaM146 engine, industrial gas turbines and other.

[imgx class="block" src="img/editifr/2015/33_0_s5.jpg"]
Test facilities

UEC-Saturn’s Test Base includes 18 rigs for tests of aviation, industrial and marine gas-turbine engines, 49 plants for unit debugging. Test Base enables to make the complete system of engineering, acceptance and certification tests in accordance with National, European and North-American standards and has no counterparts in Russia and Europe.

Complex-profiled elements prototyping

[imgx class="block" src="img/editifr/2015/33_0_t1.jpg"] Technology of growing the polymeric models of complex-profiled parts by means of the laser stereolithography method
[imgx class="block" src="img/editifr/2015/33_0_t2.jpg"]Manufacturing the complex-profiled ceramic parts based on computer models from ceramic powders by means of selective laser sintering
[imgx class="block" src="img/editifr/2015/33_0_t3.jpg"]Manufacturing the complex-profiled parts by means of direct metal deposition based on computer models, coating, worn-out (blemished) surfaces repairing, built-up welding
[imgx class="block" src="img/editifr/2015/33_0_t4.jpg"] Manufacturing the metallic parts by means of direct laser fusing the metallic powder


[ Go to gallery... ]



3 September    - The Best Production Foremen Will Be Identified at PJSC UEC-Saturn September 03, 2020, Rybinsk. – Aft...
[ More... ]



© "UEC-SATURN" 2006-2018 , Powered by SprinCMS 2.62