Industrial gas turbines GTD-4/6.3/10RM
Development: NPO Saturn JSC
Production: NPO Saturn JSC
GTD-4/6.3/10RM - family of gas turbines for application within gas-pumping units and power generating stations (from 4 MW and above).
• 9 / 10 stages high pressure compressor (depending on gas turbine modification)
• annular combustor
• 2 stages high pressure turbine
• 2 / 3 stages power turbine (depending on gas turbine modification)
GTD-4/6.3/10RМ gas turbines are used to drive the gas compressors within GPA-4/6.3/10RM gas-pumping units, applied within gas-transportation and gas-storing stations, rated at any total output power (from 4 MW and above).
GTD-4/6.3/10RМ gas turbines can also be used to drive the electric generators within power generating stations, rated at low-to-medium output capacity (from 4 to 80 MW and above), designed for electrical and heat power generation in simple, combined and cogeneration cycles at the base and intermediate loads.
• high efficiency
• high reliability and safety in operation
*2 – when operated within the GTA/GTES/PGU (depending on the heat recovery steam generator modification)
*3 – when operated within the GTA/GTES/PGU (via reduction gear)
Contacts (after sales support)
The engineering solutions offered by NPO Saturn
[ Go to gallery... ]
27 February - NPO Saturn PJSC's XXXIII Youth (winter) meeting was held February 27, 2017, Rybinsk. - One more NPO ...
[ More... ]
LATEST NEWS ABOUT US
|© NPO "SATURN" 2006-2015 , Powered by SprinCMS 2.62|